| Maximum Printing Resolution | 600 (horizontal) x 1200 (vertical) dpi | |
| Print Head / Ink | Type: | Individual Ink Cartridges |
| Number of Nozzles: | Total 4,352 nozzles | |
| Ink Droplet Size (minimum): | 5pl | |
| Ink Cartridge: | PGI-2700 (Cyan, Magenta, Yellow, Black) Optional: PGI-2700XL (Cyan, Magenta, Yellow, Black) | |
| Print Speed*1 Based on ISO / IEC 24734. Click here for summary report Click here for Document Print and Copy Speed Measurement Conditions | Document: Colour: ESAT / Simplex: | Approx. 15ipm |
| Document: Colour: |
Max. 24.0ppm*2
| |
| Document: B / W: ESAT / Simplex: | Approx. 23ipm | |
| Document: B / W: |
Max. 32.5ppm*2
| |
| Document: Colour: ESAT / Duplex: | Approx. 8ipm | |
| Document: B / W: ESAT / Duplex: | Approx. 11ipm | |
| Document: Colour: FPOT Ready / Simplex: | Approx. 9secs. | |
| Document: B / W: FPOT Ready / Simplex: | Approx. 7secs. | |
| Document: Colour: FPOT Sleep / Simplex: | Approx. 14secs. | |
| Document: B / W: FPOT Sleep / Simplex: | Approx. 11secs. | |
| Printable Width | Up to 203.2mm (8 inch) | |
| Bordered Printing: | Top margin: 3mm, Bottom margin: 5mm, Left / Right margin: each 3.4mm (LTR, LGL: Left: 6.4mm, Right: 6.3mm) | |
| Bordered Auto Duplex Printing: | Top margin: 3mm, Bottom margin: 5mm, Left / Right margin: each 3.4mm (LTR, LGL: Left: 6.4mm, Right: 6.3mm) | |
| Recommended Printing Area | Top Margin: | 45.8mm |
| Bottom Margin: | 36.8mm | |
| Paper Size | A4, A5, B5, LTR, LGL, 4 x 6", 5 x 7", 8 x 10", Envelopes(DL, COM10) Custom size (cassette (upper): width 89- 215.9mm, length 127 - 355.6mm, cassette (lower): width 210 - 215.9mm, length 249.4 - 355mm) | |
| Paper Handling (Cassette 1: Upper) (Maximum Number) | Plain Paper | A4, A5, B5, LTR, LGL = 250 |
| High Resolution Paper (HR-101N) | A4 = 65 | |
| Photo Paper Plus Glossy II (PP-201) | 4 x 6" = 20, A4 = 10 | |
| Photo Paper Pro Luster (LU-101) | A4 = 10 | |
| Photo Paper Plus Semi-Gloss (SG-201) | 4 x 6" = 20, A4 = 10 | |
| Glossy Photo Paper "Everyday Use" (GP-601) | 4 x 6" = 20, A4 = 10 | |
| Matte Photo Paper (MP-101) | 4 x 6" = 20, A4 = 10 | |
| Envelope | European DL / US Com. #10 = 10 | |
| Paper Output | Approx. 75 pages (A4, LTR) | |
| Support Media for Auto 2-sided Printing | Type: | Plain Paper |
| Size: | A4, LTR | |
| Paper Weight | Cassette 1 (Upper): | Plain Paper: 64-105g/m2, Canon specialty paper: max paper weight : approx. 275g/m2 (Photo Paper Plus Glossy II, PP-201) |
| Ink End Sensor | Electrical pulse detect + Dot count | |
| Print Head Alignment | Auto / Manual | |
| Scan*3 | ||
| Scanner Type | Flatbed & ADF | |
| Scanning Method | CIS (Contact Image Sensor) | |
| Optical Resolution*4 | 1200 x 1200dpi | |
| Selectable Resolution*5 | 25 - 19200dpi | |
| Scanning Bit Depth (Input / Output) | Grayscale: | 16bit / 8bit |
| Colour: | 48bit / 24bit (RGB each 16bit / 8bit) | |
| Line Scanning Speed*6 | Grayscale: | 1.1ms/ line (300dpi) |
| Colour: | 3.4ms/ line (300dpi) | |
| Scanning Speed*7 | Document (ADF): Colour Canon Unique / Simplex | Approx. 10ipm |
| Document (ADF): B / W Canon Unique / Simplex | Approx. 18ipm | |
| Maximum Document Size | Flatbed: | A4, LTR (216 x 297mm) |
| ADF: | A4, LTR, LGL | |
| Copy | ||
| Maximum Document Size | A4, LTR (216 × 297mm) (ADF: A4, LTR, LGL) | |
| Compatible Media | Size: | A4, A5, B5, LTR, LGL, 4 x 6", 5 x 7" |
| Type: | Plain Paper Photo Paper Plus Glossy II (PP-201) Photo Paper Plus Semi-Gloss (SG-201) Glossy Photo Paper "Everyday Use" (GP-601) Matte Photo Paper (MP-101) | |
| Image Quality | 2 positions (Standard, High) | |
| Density Adjustment | 9 positions, Auto intensity (AE copy)* *Not supported for ADF | |
| Copy Speed*8 Based on ISO / IEC 29183. Click here for summary report Click here for Document Print and Copy Speed Measurement Conditions | Document: Colour sFCOT / Simplex | Approx. 12secs. |
| Document (ADF): Colour ESAT / Simplex | Approx. 10ipm | |
| Document (ADF): B / W ESAT / Simplex | Approx. 21ipm | |
| Multiple Copy | Black / Colour: | max. 99 pages |
| Fax | ||
| Type | Desktop Transceiver (Super G3 / Colour Communication) | |
| Applicable Line | PSTN (Public Switched Telephone Network) | |
| Transmission Speed*8 | Black: | Approx. 3secs. (33.6kbps) |
| Colour: | Approx. 1min. (33.6kbps) | |
| Fax Resolution | Black: | 8pels/mm x 3.85lines/mm (Standard) 8pels/mm x 7.7lines/mm (Fine) 300 x 300dpi (Extra Fine) |
| Colour: | 200 x 200dpi | |
| Print Size | A4, LTR, LGL | |
| Scanning Width | 208mm (A4), 214mm (LTR) | |
| Modem Speed | maximum 33.6kbps (Automatic fall back) | |
| Compression | Black: | MH, MR, MMR |
| Colour: | JPEG | |
| Gradation | Black: | 256 levels |
| Colour: | 24bit Full colour (RGB each 8bit) | |
| ECM (Error Correction Mode) | ITU-T T.30 compatible | |
| Coded Speed Dialing: | max. 100 locations | |
| Group Dialing: | max. 99 locations | |
| Transmission / Reception Memory*9 | Approx. 250 pages | |
| PC Fax | ||
| Type | Windows: | via FAX modem (in MFP) |
| Mac: | N/A | |
| Destination Number | 1 location | |
| Black / Colour | B / W transmission only | |
| Network | ||
| Protocol | TCP/IP | |
| Wired LAN | Network Type: | IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) |
| Data Rate: | 10M / 100Mbps (auto switchable) | |
| Wireless LAN | Network Type: | IEEE802.11n / IEEE802.11g / IEEE802.11b |
| Frequency Band: | 2.4GHz | |
| Range: | indoor 50m (depends on the transmission speed and conditions) | |
| Security: | WEP64 / 128bit, WPA-PSK (TKIP / AES), WPA2-PSK (TKIP / AES) | |
| System Requirements (Please visit www.canon-asia.com to check OS compatibility and to download the latest driver updates.) | Windows: | Windows 8 / Windows 7 / Windows Vista / Windows XP |
| Macintosh: | Mac OS X v10.6.8 and later | |
| General | ||
| Operation Panel | Display: | LCD (3.0inch / 7.5cm TFT colour / Touch screen) |
| ADF | Paper Handling (Plain Paper): | A4, LTR = 50, LGL = 10 |
| Interface | USB flash memory, USB 2.0 Hi-Speed | |
| Apple AirPrint | Available | |
| Google Cloud Print | Available | |
| MAXIFY Cloud Link | from smartphone or tablet: | Available |
| from printer: | Available | |
| Print from Email | Available | |
| MAXIFY Printing Solutions | Available | |
| Access Point Mode | Available | |
| Operating Environment*11 | Temperature: | 5 - 35°C |
| Humidity: | 10 - 90% RH (no dew condensation) | |
| Recommended Environment *12 | Temperature: | 15 - 30°C |
| Humidity: | 10 - 80% RH (no dew condensation) | |
| Storage Environment | Temperature: | 0 - 40°C |
| Humidity: | 5 - 95% RH (no dew condensation) | |
| Acoustic Noise (PC Print) | Document (A4, B / W)*13 | Approx. 54dB(A) |
| Power | AC 100 - 240V, 50 / 60Hz | |
| Power Consumption | Standby (scanning lamp is off) USB connection to PC: | Approx. 1.0W |
| OFF: | Approx. 0.3W | |
| Copying*14 (USB connection to PC): | Approx. 29W | |
| Typical Electricity Consumption (TEC)*15 | Approx. 0.3kWh | |
| Environment | Regulation: | RoHS (EU, China), WEEE (EU) |
| Eco-Label: | Energy Star, EPEAT (Silver) | |
| Duty Cycle | up to 30,000 pages/month | |
| Dimensions (W x D x H) | Factory Configuration Maximum (input / output / ADF trays extended) | approx. 463 x 394 x 291 mm (min. size) |
| Weight | Approx. 11.4kg | |
| Specifications are subject to change without notice. | |
| *1 |
Document print speeds are the averages of ESAT in Office Category Test for the default simplex mode, ISO / IEC 24734.
Document print speeds are the averages of FPOT in Office Category Test for the default simplex mode, ISO / IEC17629:2014 Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used etc. |
| *2 | PPM print speed is based on the highest speed settings using Canon standard patterns on A4 plain paper. |
| *3 | TWAIN driver (ScanGear) is based on the TWAIN specification V1.9 and requires the Data Source Manager comes with the operating. |
| *4 | Optical resolution is a measure of maximum hardware sampling resolution, based on ISO 14473 standard. |
| *5 | Increasing the scanning resolution will limit the maximum possible scanning area. |
| *6 | The fastest speed in Hi-Speed USB on Windows PC. Transfer time to computer is not included. |
| *7 | ADF continuous PC scan speed is determined from the time spent for scanning of multiple sets of the test pages that take more than 30 seconds after first set of scanning. The test charts (consist of 4 pages) are printed by the device for testing and used for measuring ISO / IEC24735. "Scan speed may vary depending on system configuration, interface, software, scan mode settings, document size and use frequency etc. software, scan mode settings, document size and use frequency etc." When scanning or copying a certain volume of documents continuously from the ADF, the printer may switch to "waiting mode" in which paper feeding stops for several tens of seconds after each scan, in order to prohibit overheating the paper feeding mechanism of the ADF. The timing of the "waiting mode" may vary depending on scan settings such as colour/mono, resolution and so on. In case of the default settings (scan or copy in colour, 300dpi), the printer switches to "waiting mode" after approx. 80 sheets of paper feeding continuously or repeatedly in short period. |
| *8 | Copy speeds are the average of sFCOT and sESAT, ISO / IEC 29183. ADF copy speed is the average of ESAT in General Performance Test for the default simplex mode, ISO/IEC 24735, excluding time to copy the first set. Copy speed may vary depending on document complexity, copy mode, page coverage, type of paper used etc. and does not take into account warm-up time. When scanning or copying a certain volume of documents continuously from the ADF, the printer may switch to "waiting mode" in which paper feeding stops for several tens of seconds after each scan, in order to prohibit overheating the paper feeding mechanism of the ADF. The timing of the "waiting mode" may vary depending on scan settings such as colour/mono, resolution and so on. In case of the default settings (scan or copy in colour, 300dpi), the printer switches to "waiting mode" after approx. 80 sheets of paper feeding continuously or repeatedly in short period. |
| *9 | Black & white document fax transmission speed is based on default setting using ITU-T No.1 chart. Color document fax transmission speed is based on default setting using Canon Color Fax Test Sheet. Actual transmission speed may vary depending on document complexity, fax settings at receiving end, and line conditions etc. |
| *10 | Page count is based on ITU-T No.1 chart or Canon FAX Standard Chart No.1. |
| *11 | The performance of the printer may be reduced under certain temperature and humidity conditions. |
| *12 | For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions. |
| *13 | Acoustic Noise is measured based on ISO7779 standard. |
| *14 | Copy: When copying ISO / JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings. Print: When printing ISO / JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings. |
| *15 | Typical Electricity Consumption (TEC) value: TEC value was calculated assuming the unit will be constantly switched among operational mode, sleep mode, and power-off mode for 5 days, and that it will be either in sleep or power-off mode for the remaining 2 days within the same week. The TEC value of this product is calculated by Canon on their own accord using TEC measurement procedure regulated in International ENERGY STAR Program. |
| Disclaimer | |
| • |
Print speed decreases when ink is running low (upon display of the low ink status).
|
| • |
An installed ink tank cannot be removed until the message to replace it is displayed.
|
| • |
You need to install ink tanks or ink cartridges of all colours whether you perform black and white printing or colour printing. If any one of the ink tanks or ink cartridges is not installed, an error occurs and you cannot perform printing.
|
| • |
Depending on the paper or the print settings, colour ink may be consumed even when you print a document in black or perform printing in black and white. When any one of the colours of ink has run out, you need to replace the ink tank or ink cartridge.
|
| • |
When you use the Canon printer for the first time after you install the bundled ink tanks, the printer consumes a small amount of ink in the amount to enable printing by filling the nozzles of the Print Head with ink. For this reason, the number of sheets that can be printed with the first ink tanks is fewer than the succeeding ink tanks.
|
| • |
The printing costs described in the brochures or websites are based on the consumption data from not the first ink tank / ink cartridge but the succeeding ink tank / ink cartridge.
|
| • |
To keep printer's performance, Canon printer performs cleaning automatically according to its condition. When the printer performs cleaning, a small amount of ink is consumed. In this case, all colours of ink may be consumed.
[Cleaning function] The cleaning function helps the printer to suck air bubbles or ink itself from the nozzle and thus prevents print quality degradation or nozzle clogging. |
| • |
The repairing parts for printers will be available five years after production is discontinued. Depending on your model, we may ask you to replace it with a new one, or one with almost the same performance as a maintenance service. In this case, it may be that you cannot use supplies or accessories for your model or the compatible OS will be changed.
|
| • |
The warranty term for free repair varies from country to country and starts from the date of purchase. Free repair does not apply to supplies (paper or ink tanks / cartridges / print head) even within the warranty term.
|
| • |
To obtain good printing quality, use up ink within six months after opening.
|
| • |
Regarding a solution to a problem caused by using non-genuine ink cartridges (including ones supplemented with non-genuine ink by making a hole in the cartridge or so), a fee will be charged even within the warranty term. Keep this in your mind when you use non-genuine ink.
|
| • |
If you use non-genuine ink cartridges (including ones supplemented with non-genuine ink by making a hole in the cartridge or so), they may have a negative effect on the performance of the printer or the printing quality may be reduced. In addition, though it is a rare case and does not present a safety hazard, it is reported that a print head will become heated or smoke will be emitted from it due to an ingredient not contained in genuine Canon ink. (Note that this does not apply to all non-genuine ink.)
|
| • |
CREATIVE PARK PREMIUM is a premium content service available exclusively to users only when all of the colours of genuine Canon inks are installed.
|
| • |
A printer with a fax function stores the following fax data in printer's memory:
- Faxes not printed out due to conditions such as ink running out. - Faxes in the send queue. If you disconnect the power cord, the date and time settings are reset and faxes stored in the printer's memory will be deleted. Before you disconnect the power cord, confirm that faxes you need to keep have already been printed or sent. |
| • |
If you will be installing the Canon printer driver on Mac OS X and using the printer through a network connection, you can select [Bonjour] or [canonijnetwork] in the [Add Printer] dialog. If [Bonjour] is selected, remaining ink level messages may differ from those indicated by [canonijnetwork]. [canonijnetwork] is not displayed if the Canon printer driver is not installed. Access our web site through the Internet and download the latest printer driver for your model. Canon recommends you to use [canonijnetwork] for printing.
|
3d manufacturing
3d manufacturing technology
3d printer business
3d printer for business
3d printer for manufacturing
3d printer manufacturers
3d printer manufacturing companies
3d printer manufacturing process
3d printers for business
3d printers for manufacturing
3d printers manufacturers
3d printing and manufacturing
3d printing and manufacturing industry
3d printing manufacturing process
3d printing manufacturing technology
3d printing service
